How to Use DAKA TurboDak 3 E-Rig?
The DAKA TurboDak 3 E-rig is a portable electric dab rig designed for vaporizing cannabis concentrates such as wax, shatter, or hash oil. It offers precise temperature control, even heating, and extended battery life, and is very easy to use and clean. This article will walk you through how to use the DAAK TurboDak 3 E-rig step by step.
What’s Inside the Box?
If you’ve just received your DAKA TurboDak 3 ERIG, here’s what’s included in the box. These items are essential for using DAKA TurboDak 3.
- DAKA Base
- Glass Chamber
- DAKA 22mm Atomizer
- Loading Tool
- Filling Tool
- Cotton Swabs
- USB-C Charging Cable
All components work together to deliver a smooth and reliable dabbing experience.
How to Use DAKA TurboDak 3 ERIG
Step 1: Charging the Device
Fully charge the device before first use.
Charging details:
- Charging time: approximately 2.5 to 3 hours
- Charging port: USB Type-C (located on the base)
- Input voltage: 5V
- Maximum charging current: 2A
When charging, the battery icon on the screen will animate.
When fully charged, the battery icon will display a full bar.
For safety, do not use the device while charging.
Step 2: Add Water to the Glass Chamber
Add an appropriate amount of water to the glass chamber to filter out vapor, resulting in a purer and smoother inhalation experience. Here is how to fill it with water:
- Remove the glass chamber from the base.
- Add water into the chamber.
- Water should sit just above the air holes.
- Keep water below one-third of the central cone.
- Do not overfill.
- After filling, securely attach the glass chamber back to the base.
Step 3: Power On the Device
Press the power button 5 times quickly within 2 seconds.
When the screen displays “DAKA” for 2 seconds and enter the main interface, the device powers on.
Tips: Press the power button 5 times quickly within 2 seconds until the screen displays “SYSTEM OFF”.
Step 4: Adjust the Temperature
The DAKA TurboDak 3 E-Rig features dedicated + and – buttons that allow you to precisely adjust the temperature between 350°F and 650°F. Lower temperatures provide better flavor, while higher temperatures produce thicker vapor.
Controls:
- Single click: adjust temperature by 1 degree
- Press and hold: continuous temperature adjustment
- Press 3 times: switch between Fahrenheit and Celsius
Step 5: Select a Heating Mode
Once you've set the temperature, you'll need to select a heating mode. The DAKA TurboDak 3 e-rig offers two heating modes to choose from: automatic and manual.
Auto Heating Mode
- Double click the power button.
- The red light turns on.
- The screen displays rising temperature.
- When the set temperature is reached, the LED turns solid green.
- The 60-second countdown begins, and heating starts.
Note: To stop heating early, press the power button once.
Manual Heating Mode
- Press and hold the power button.
- The red light pulses and the heating begins.
- Release the button to stop heating.
When target temperature is reached, the LED turns solid green and countdown begins.
Step 6: Begin inhaling
Once heating is complete, you can begin inhaling the vapor through the mouthpiece at the top of the glass chamber.
Step 7: Power Off and Clean
After use, turn off the device and wipe the atomizer with a dry cotton swab.
Warning Indicators
The device may display the following messages:
LOW BATTERY: Recharge the device.
SHORTED: Output short circuit detected. Stop use and check if the atomizer is properly connected.
NO ATOMIZER: Atomizer is missing or not securely installed.
LED Indicator Guide
Red light on: Heating in progress.
Red light flashing: Battery low or protection mode activated.
Solid green light: Target temperature reached and ready to use.
Safety Tips
- Do not operate without water in the chamber.
- Do not overfill water.
- Keep the base unit dry at all times.
- Use only compatible 22mm atomizers.
- Allow device to cool before cleaning.
- Do not use while charging.
Following these steps ensures safe and efficient performance.
Cleaning and Maintenance
To maintain optimal flavor and performance, it's important to clean your e-rig regularly.
- Clean the atomizer after each session.
- Use cotton swabs while the chamber is warm (not hot).
- Do not submerge the base unit in water.
- Regular cleaning improves longevity and taste quality.
Final Thoughts
The DAKA Turbo DAK 3 eRig is designed for convenience, portability, and consistent heating performance.
With simple one-button controls, adjustable temperature settings, and dual heating modes, it offers both beginner-friendly operation and customizable performance for experienced users.
By following this guide, you can enjoy a smooth and reliable dabbing experience every time.